Axia Alloys Cargo System keeps your gear safe and secure

| January 22, 2010 | 1 Comment

Axia Alloys Cargo System

Securing an ice chest, an extra fuel jug or a box of tools and supplies in the bed of a UTV can be a bit of a challenge. Tie down points can be in the wrong place, not strong enough or they are able to hold down in one direction, but not another. If you have a custom cage, you might have had a special rack designed that works great with a specific sized ice chest, but wont hold a fuel can. And in the lightweight plastic bed of a Polaris RZR, it can be even more of a challenge.

Thankfully, Axia Alloys has a solution. The Axia Alloys Cargo System is the most versatile UTV mounting system on the market. Their mounting system comes with two adjustable arms which allow you to mount virtually anything to a horizontal crossbar on the roll cage.

These extremely strong arms are machined from aircraft quality aluminum so that they are strong enough for virtually any size cooler, one or two gas cans, duffel bags, toolboxes, camping gear, etc. When not in use they can easily be rotated up and out of the way for more rear passenger leg room or other cargo. They are supplied with several different lengths of Velcro straps to hold both small and large items.

Cargo Mounting Arms

A roll cage with a horizontal bar either located in front of or along the side of the bed are required to properly use this mounting system.

Axia Alloys uses a modular roll cage clamping system that is used to attach their accessories to your roll bar. This innovative system allows you to choose from several different sizes of strap clamps depending on your roll cage tubing diameter, and apply these clamps to a variety of unique attachments. These strap clamps have an extremely low profile around the cage tubing for clearance under windshields, roofs, and other accessories.

And since the clamp is separate from the accessory, it is easy to mix and match various accessories with different roll bar sizes.

Axia Alloys Clamps 1.0", 1.25", 1.5", 1.625", 1.7", 1.75", 1.875" and 2.0" sizes

1.0", 1.25", 1.5", 1.625", 1.7", 1.75", 1.875" and 2.0" clamp sizes

The Axia Alloys Cargo System is truly a flexible setup. All sorts of sizes and shapes can be securely tied down in the bed of your UTV.

The "old" way of securing the Action Packer in my RZR S

I especially liked how they worked in our 2010 Polaris RZR S since there aren’t solid tie down points. Previously, I used a combination of bungee cords and a ratchet strap. The Axia Alloys setup is much cleaner and more secure.